Combi D6E iNet X Panel Central operating system for retrofitting

Individual, energy-efficient, self-sufficient – the next generation Combi D 6 E
The Combi D 6 E is structurally identical to the Combi D 6, the only difference being the integrated electric heating elements. The diesel version is equipped with a high-quality burner and therefore reliably heats the vehicle while driving.

At the camp site, simply switch over to electrical mode and run the heater with 230 V, with no need for the vehicle battery. Depending on the required output, choose between diesel, electric or mixed mode: in milder weather, set the appliance to electrical mode, on colder days to diesel mode and in extremely cold weather use mixed mode – diesel and electric heating. Through four air outlets, the warm air flows into the vehicle where it is distributed optimally.

The powerful Combi D 6 E heats larger vehicles within a short time. The appliance also has a 10-litre water tank, which is heated at the same time when hot water is required. This means that you do not need an additional water heater, which saves space and weight. The Combi heater is also very compact and offers many different installation options.

The Combi D 6 E is controlled and monitored with the digital Truma CP plus (iNet ready) control panel or via the iNet X System.

• Can also be operated with an empty water tank
• FrostControl drain valve is installed
• Simple operation with the digital Truma CP plus (iNet ready) control panel or via iNet X System
• Optimum warm air distribution via four air outlets
• 10-litre stainless steel water tank
• Compact and space-saving, various installation options
• Heats the vehicle and water very quickly
• Uses little energy
• Integrated pressure sensor automatically controls the combustion air infeed
• Long service life thanks to efficient combustion control
• Automatic climate control possible in combination with a Truma air conditioner

The core of the Truma iNet X System and the first step to a smart camper van, the Truma iNet X Panel is the central control panel of the iNet X System for retrofitting. The panel is therefore the key to our new technology that makes your vehicle smart. 

Highlights of the Truma iNet X Panel at a glance:

• Central control unit: manage your appliances with just one operating system
• Full overview: always keep an eye on your indoor climate and notifications
• Future-oriented: subsequently add new appliances and services by means of updates
• Connected on the move: also use your smartphone for advanced control
• Independently on track: eradicate malfunctions independently, thanks to detailed error descriptions
• Quality you can trust: benefit from regular optimisations.